date
A function/method to calculate the next workday, taking into account US federal holidays:
<?php
function getNextWorkDayTime($date=null)
{
$time = is_string($date) ? strtotime($date) : (is_int($date) ? $date : time());
$y = date('Y', $time);
// calculate federal holidays
$holidays = array();
// month/day (jan 1st). iteration/wday/month (3rd monday in january)
$hdata = array('1/1'/*newyr*/, '7/4'/*jul4*/, '11/11'/*vet*/, '12/25'/*xmas*/, '3/1/1'/*mlk*/, '3/1/2'/*pres*/, '5/1/5'/*memo*/, '1/1/9'/*labor*/, '2/1/10'/*col*/, '4/4/11'/*thanks*/);
foreach ($hdata as $h1) {
$h = explode('/', $h1);
if (sizeof($h)==2) { // by date
$htime = mktime(0, 0, 0, $h[0], $h[1], $y); // time of holiday
$w = date('w', $htime); // get weekday of holiday
$htime += $w==0 ? 86400 : ($w==6 ? -86400 : 0); // if weekend, adjust
} else { // by weekday
$htime = mktime(0, 0, 0, $h[2], 1, $y); // get 1st day of month
$w = date('w', $htime); // weekday of first day of month
$d = 1+($h[1]-$w+7)%7; // get to the 1st weekday
for ($t=$htime, $i=1; $i<=$h[0]; $i++, $d+=7) { // iterate to nth weekday
$t = mktime(0, 0, 0, $h[2], $d, $y); // get next weekday
if (date('n', $t)>$h[2]) break; // check that it's still in the same month
$htime = $t; // valid
}
}
$holidays[] = $htime; // save the holiday
}
for ($i=0; $i<5; $i++, $time+=86400) { // 5 days should be enough to get to workday
if (in_array(date('w', $time), array(0, 6))) continue; // skip weekends
foreach ($holidays as $h) { // iterate through holidays
if ($time>=$h && $time<=$h+86400) continue 2; // skip holidays
}
break; // found the workday
}
return $time;
}
?>
getdate
(PHP 4, PHP 5)
getdate — Retourne la date/heure
Description
array getdate
([ int $timestamp= time()
] )
Retourne un tableau associatif contenant les informations de date et d'heure du timestamp timestamp lorsqu'il est fourni, sinon, le timestamp de la date/heure courante locale.
Liste de paramètres
- timestamp
-
Le paramètre optionnel timestamp est un timestamp Unix de type entier qui vaut par défaut l'heure courante locale si le paramètre timestamp n'est pas fourni. En d'autres termes, il faut par défaut la valeur de la fonction time().
Valeurs de retour
Retourne un tableau associatif contenant les informations de date et d'heure du timestamp timestamp . Les éléments du tableau associatif retourné sont les suivants :
| Clé | Description | Exemple de valeur retournée |
|---|---|---|
| "seconds" | Représentation numérique des secondes | 0 à 59 |
| "minutes" | Représentation numérique des minutes | 0 à 59 |
| "hours" | Représentation numérique des heures | 0 à 23 |
| "mday" | Représentation numérique du jour du mois courant | 1 à 31 |
| "wday" | Représentation numérique du jour de la semaine courante | 0 (pour Dimanche) à 6 (pour Samedi) |
| "mon" | Représentation numérique du mois | 1 à 12 |
| "year" | Année, sur 4 chiffres | Exemples : 1999 ou 2003 |
| "yday" | Représentation numérique du jour de l'année | 0 à 365 |
| "weekday" | Version texte du jour de la semaine | Sunday à Saturday |
| "month" | Version texte du mois, comme January ou March | January à December |
| 0 | Nombre de secondes depuis l'époque Unix, similaire à la valeur retournée par la fonction time() et utilisée par date(). | Dépend du système, typiquement de -2147483648 à 2147483647. |
Exemples
Exemple #1 Exemple avec getdate()
<?php
$today = getdate();
print_r($today);
?>
L'exemple ci-dessus va afficher quelque chose de similaire à :
Array
(
[seconds] => 40
[minutes] => 58
[hours] => 21
[mday] => 17
[wday] => 2
[mon] => 6
[year] => 2003
[yday] => 167
[weekday] => Tuesday
[month] => June
[0] => 1055901520
)
Voir aussi
- date() - Formate une date/heure locale
- time() - Retourne le timestamp UNIX actuel
- setlocale() - Modifie les informations de localisation
add a note
User Contributed Notesgetdate
moshe at unirgy dot com
08-Sep-2009 01:47
08-Sep-2009 01:47
binupillai2003 at yahoo dot com(Binu V Pillai)
25-Aug-2009 09:32
25-Aug-2009 09:32
<?php
/* Function to find the first and last day of the month from the given date.
*
* Author Binu v Pillai binupillai2003@yahoo.com
* @Param String yyyy-mm-dd
*
*/
function findFirstAndLastDay($anyDate)
{
//$anyDate = '2009-08-25'; // date format should be yyyy-mm-dd
list($yr,$mn,$dt) = split('-',$anyDate); // separate year, month and date
$timeStamp = mktime(0,0,0,$mn,1,$yr); //Create time stamp of the first day from the give date.
$firstDay = date('D',$timeStamp); //get first day of the given month
list($y,$m,$t) = split('-',date('Y-m-t',$timeStamp)); //Find the last date of the month and separating it
$lastDayTimeStamp = mktime(0,0,0,$m,$t,$y);//create time stamp of the last date of the give month
$lastDay = date('D',$lastDayTimeStamp);// Find last day of the month
$arrDay = array("$firstDay","$lastDay"); // return the result in an array format.
return $arrDay;
}
//Usage
$dayArray=array();
$dayArray=findFirstAndLastDay('2009-02-25');
print $dayArray[0];
print $dayArray[1];
?>
eric dot schultz at NOSPAM dot CyVon dot com
17-Dec-2008 03:33
17-Dec-2008 03:33
Here is another gmgetdate that is a little faster/suscint (no loops).
<?php
function gmgetdate2($ts = null){
$k = array('seconds','minutes','hours','mday',
'wday','mon','year','yday','weekday','month',0);
return(array_combine($k,split(":",
gmdate('s:i:G:j:w:n:Y:z:l:F:U',is_null($ts)?time():$ts))));
}
?>
It also returns the values in the same order as getdate.
Anonymous
16-Oct-2008 04:01
16-Oct-2008 04:01
I couldn't get the last 2 examples of gmgetdate() to work, so here's a modification that did work for me that behaves exactly like getdate() :
<?php
function gmgetdate($timestamp = null) {
if (is_null($timestamp)) { $timestamp = time(); }
$dateParts = array(
'mday' => 'j',
'wday' => 'w',
'yday' => 'z',
'mon' => 'n',
'year' => 'Y',
'hours' => 'G',
'minutes' => 'i',
'seconds' => 's',
'weekday' => 'l',
'month' => 'F',
0 => 'U'
);
while (list($part, $format) = each($dateParts)) {
$GMdateParts[$part] = gmdate($format, $timestamp);
}
return $GMdateParts;
}
?>
Ian Thomas
12-Sep-2008 05:45
12-Sep-2008 05:45
Simplier version of gmgetdate
function gmgetdate($timestamp = null)
{
if ($timestamp) return getdate($timestamp);
else return getdate(time());
}
Note: A unix timestamp is always represented in GMT (or more correctly UCT)
chris AT cmbuckley DOT co DOT uk
08-Aug-2008 04:08
08-Aug-2008 04:08
For those who want the gmgetdate function that matches the behaviour of getdate:
<?php
function gmgetdate($timestamp = null) {
if (is_null($timestamp)) { $timestamp = time(); }
$dateParts = array(
'mday' => 'j',
'wday' => 'w',
'yday' => 'z',
'mon' => 'n',
'year' => 'Y',
'hours' => 'G',
'minutes' => 'i',
'seconds' => 's',
'weekday' => 'l',
'month' => 'F',
0 => 'U'
);
while (list(, $value) = each($dateParts)) {
$value = gmdate($value, $timestamp);
if (is_numeric($value)) { $value = (int)$value; }
}
return $dateParts;
}
?>
timforte at gmail dot com
10-Jan-2008 05:07
10-Jan-2008 05:07
It's worth noting that this is local time, not UTC/GMT - gmgetdate doesn't exist :(.
The most logical way to handle date arithmetic without hitting DST problems is to work in UTC...
<?php
function add_days($my_date,$numdays) {
$date_t = strtotime($my_date.' UTC');
return gmdate('Y-m-d',$date_t + ($numdays*86400));
}
?>
[it's even faster if you use gmmktime instead of strtotime]
andre at anlex dot co dot za
13-Dec-2006 01:38
13-Dec-2006 01:38
I thought best to show a posseble way to go about bypassing the end month issue where the first day in a new month will have the monday of the week that it falls in - in the old month. Use the numbering of days as the constant and work you way from there.
Example:
<?php
//-----------------------------
$now = time();
$num = date("w");
if ($num == 0)
{ $sub = 6; }
else { $sub = ($num-1); }
$WeekMon = mktime(0, 0, 0, date("m", $now) , date("d", $now)-$sub, date("Y", $now)); //monday week begin calculation
$todayh = getdate($WeekMon); //monday week begin reconvert
$d = $todayh[mday];
$m = $todayh[mon];
$y = $todayh[year];
echo "$d-$m-$y"; //getdate converted day
?>
Allot less code makes everyone happy..
Jared Armstrong
10-Dec-2006 07:05
10-Dec-2006 07:05
A nice little function I wrote to determine what number occurrence weekday it is of the month for a given timestamp. (I.e. 2nd Friday, or the 3rd Thursday)
Eg: print_r(getWeekdayOccurrence(mktime(0, 0, 0, 12, 1, 2006)));
Outputs: Array ( [0] => 1 [1] => Friday ) [The first friday]
Eg. print_r(getWeekdayOccurrence(mktime(0, 0, 0, 8, 17, 2009)));
Outputs: Array ( [0] => 3 [1] => Monday ) [The third Monday]
<?php
function getWeekdayOccurrence($time) {
$month = intval(date("m", $time)); $day = intval(date("d", $time));
for ($i = 0; $i < 7; $i++) {
$days[] = date("l", mktime(0, 0, 0, $month, ($i+1), date("Y", $time)));
}
$posd = array_search(date("l", $time), $days);
$posdm = array_search($days[0], $days) - $posd; /
return array((($day+$posdm+6)/7), $days[$posd]);
}
?>
cesar at nixar dot org
22-Oct-2006 05:49
22-Oct-2006 05:49
<?php
/**
* This function is similar to getdate() but it returns
* the month information.
*
* Returns an associative array containing the month
* information of the parameters, or the current month
* if no parameters are given.
*
*/
function getmonth ($month = null, $year = null)
{
// The current month is used if none is supplied.
if (is_null($month))
$month = date('n');
// The current year is used if none is supplied.
if (is_null($year))
$year = date('Y');
// Verifying if the month exist
if (!checkdate($month, 1, $year))
return null;
// Calculating the days of the month
$first_of_month = mktime(0, 0, 0, $month, 1, $year);
$days_in_month = date('t', $first_of_month);
$last_of_month = mktime(0, 0, 0, $month, $days_in_month, $year);
$m = array();
$m['first_mday'] = 1;
$m['first_wday'] = date('w', $first_of_month);
$m['first_weekday'] = strftime('%A', $first_of_month);
$m['first_yday'] = date('z', $first_of_month);
$m['first_week'] = date('W', $first_of_month);
$m['last_mday'] = $days_in_month;
$m['last_wday'] = date('w', $last_of_month);
$m['last_weekday'] = strftime('%A', $last_of_month);
$m['last_yday'] = date('z', $last_of_month);
$m['last_week'] = date('W', $last_of_month);
$m['mon'] = $month;
$m['month'] = strftime('%B', $first_of_month);
$m['year'] = $year;
return $m;
}
// Output
print_r(getmonth(11, 1978));
print_r(getmonth());
?>
Cas_AT_NUY_DOT_INFO
04-Mar-2006 02:47
04-Mar-2006 02:47
<?php
// This functions calculates the next date only using business days
// 2 parameters, the startdate and the number of businessdays to add
function calcduedate($datecalc,$duedays) {
$i = 1;
while ($i <= $duedays) {
$datecalc += 86400; // Add a day.
$date_info = getdate( $datecalc );
if (($date_info["wday"] == 0) or ($date_info["wday"] == 6) ) {
$datecalc += 86400; // Add a day.
continue;
}
$i++;
}
return $datecalc ;
}
?>
leo25in at yahoo dot com
11-May-2005 02:17
11-May-2005 02:17
getting weekday(actual date) from any give date.
<?php
function cal_date($wday,$tstamp)
{
return $tstamp-($wday*(24*3600));
}
function getweekday($m,$d,$y)
{
$tstamp=mktime(0,0,0,$m,$d,$y);
$Tdate = getdate($tstamp);
$wday=$Tdate["wday"];
switch($wday)
{
case 0;
$wstamp=cal_date($wday,$tstamp);
//echo date("Y-m-d",$wstamp);
break;
case 1;
$wstamp=cal_date($wday,$tstamp);
//echo date("Y-m-d",$wstamp);
break;
case 2;
$wstamp=cal_date($wday,$tstamp);
//echo date("Y-m-d",$wstamp);
break;
case 3;
$wstamp=cal_date($wday,$tstamp);
//echo date("Y-m-d",$wstamp);
break;
case 4;
$wstamp=cal_date($wday,$tstamp);
//echo date("Y-m-d",$wstamp);
break;
case 5;
$wstamp=cal_date($wday,$tstamp);
//echo date("Y-m-d",$wstamp);
break;
case 6;
$wstamp=cal_date($wday,$tstamp);
//echo date("Y-m-d",$wstamp);
break;
}
$w["day"]=date("d",$wstamp);
$w["month"]=date("m",$wstamp);
$w["year"]=date("Y",$wstamp);
return $w;
}
?>
getisomonday($year, $week)
21-Apr-2004 11:58
21-Apr-2004 11:58
getdate does not convert week numbers. this function relies on strftime to find a timestamp that falls on the monday of specified year and ISO week:
<?php function getisomonday($year, $week) {
# check input
$year = min ($year, 2038); $year = max ($year, 1970);
$week = min ($week, 53); $week = max ($week, 1);
# make a guess
$monday = mktime (1,1,1,1,7*$week,$year);
# count down to week
while (strftime('%V', $monday) != $week)
$monday -= 60*60*24*7;
# count down to monday
while (strftime('%u', $monday) != 1)
$monday -= 60*60*24;
# got it
return $monday;
} ?>
Yura Pylypenko (plyrvt at mail dot ru)
15-Sep-2003 03:29
15-Sep-2003 03:29
In addition to canby23 at ms19 post:
It's a very bad idea to consider day having 24 hours (86400 secs), because some days have 23, some - 25 hours due to daylight saving changes. Using of mkdate() and strtotime() is always preferred. strtotime() also has a very nice behaviour of datetime manipulations:
<?php
echo strtotime ("+1 day"), "\n";
echo strtotime ("+1 week"), "\n";
echo strtotime ("+1 week 2 days 4 hours 2 seconds"), "\n";
echo strtotime ("next Thursday"), "\n";
echo strtotime ("last Monday"), "\n";
?>