PHP 8.3.4 Released!

Masques récursifs

Considérons le cas où il faut rechercher dans une chaîne avec un niveau d'imbrications infini de parenthèses. Sans l'aide de la récursivité, le mieux que nous puissions obtenir est de créer un masque avec un niveau fixé de profondeur d'imbrication. Il n'est pas possible de traiter des masques à niveau d'imbrication variable. PCRE fournit un nouvel outil expérimental qui permet d'utiliser la récursivité dans les masques (entre autres). L'option (?R) est fournie pour servir la cause de la récursivité. Le masque suivant résout le problème des parenthèses (l'option PCRE_EXTENDED est utilisée pour ignorer les espaces) : \( ( (?>[^()]+) | (?R) )* \)

Tout d'abord, le masque recherche une parenthèse ouvrante. Puis, il recherche n'importe quel nombre de sous-chaînes qui sont soit des séquences de caractères non-parenthèses, ou bien une recherche récursive avec le même masque (i.e. une chaîne correctement incluse entre parenthèses). Finalement, il recherche une parenthèse fermante.

Cet exemple particulier contient un nombre illimité de répétitions imbriquées, ce qui fait que l'utilisation de sous-chaînes à utilisation unique pour rechercher les séquences de caractères non-parenthèses est important, lorsqu'il s'applique à une chaîne qui n'est pas valide. Par exemple, si on l'applique à (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa() la réponse arrive rapidement. Sinon, si les sous-chaînes à utilisation unique ne sont pas utilisées, la recherche peut prendre un temps très long, car il existe de très nombreuses combinaisons de + et * à tester avant de conclure à l'échec.

Les valeurs utilisées pour capturer les sous-masques sont celles utilisées par les niveaux les plus hauts de récursivité, auxquels la valeur est fixée. Si le masque précédent est utilisé avec (ab(cd)ef) la valeur de la parenthèse capturante est "ef", qui est la dernière valeur lue au niveau supérieur. Si de nouvelles parenthèses sont ajoutées, par exemple : \( ( ( (?>[^()]+) | (?R) )* ) \) alors la chaîne capturée est "ab(cd)ef", c'est-à-dire le contenu de la parenthèse capturante de plus haut niveau. S'il y a plus de 15 parenthèses capturantes dans une chaîne, PCRE doit utiliser plus de mémoire pour stocker ces données. S'il ne peut obtenir cette mémoire supplémentaire, il ne fait que sauver les 15 premières, car il n'y a pas moyen de générer une erreur de mémoire dans le cadre d'une récursivité.

(?1), (?2) et suivants peuvent être également utilisés pour les sous masques récursifs. Il est également possible d'utiliser les sous masques nommés : (?P>foo) ou (?&name).

Si la syntaxe pour une référence de sous-masque récursif (soit par un nombre ou par un nom) est utilisée en dehors des parenthèses à laquelle elle fait référence, il opère comme une sous-routine dans un langage de programmation. Un exemple ci-dessus a montré que le masque (sens|respons)e and \1ibility trouvera "sense and sensibility" et "response and responsibility", mais pas "sense and responsibility". Si on utilise plutôt le masque (sens|respons)e and (?1)ibility alors, il trouvera "sense and responsibility" tout comme les deux autres chaînes. De telles références doivent, dépendant, suivre le sous-masque auquel elles se réfèrent.

La longueur maximale d'un sujet correspond au plus grand nombre positif qu'une variable entière peut contenir. Cependant, PCRE utilise la récursivité pour gérer les sous-masques et les répétitions infinies. Ce qui signifie que l'espace disponible pour la pile peut limiter la taille du sujet qui peut être passé à certains masques.

add a note

User Contributed Notes 8 notes

up
19
horvath at webarticum dot hu
10 years ago
With the (?R) item you can link only to the full pattern, because it quasi equals to (?0). You can not use anchors, asserts etc., and you can only check that string CONTAINS a valid hierarchy or not.

This is wrong: ^\(((?>[^()]+)|(?R))*\)$

However, you can bracketing the full expression, and replace (?R) to the relative link (?-2). This make it reusable. So you can check complex expressions, for example:
<?php

$bracket_system
= "(\\(((?>[^()]+)|(?-2))*\\))"; // (reuseable)
$bracket_systems = "((?>[^()]+)?$bracket_system)*(?>[^()]+)?"; // (reuseable)
$equation = "$bracket_systems=$bracket_systems"; // Both side of the equation must be contain valid bracket systems
var_dump(preg_match("/^$equation\$/","a*(a-(2a+2))=4(a+3)-2(a-(a-2))")); // Outputs 'int(1)'
var_dump(preg_match("/^$equation\$/","a*(a-(2a+2)=4(a+3)-2(a-(a-2)))")); // Outputs 'int(0)'

?>

You can also catch multibyte quotes with the 'u' modifier (if you use UTF-8), eg:
<?php

$quoted
= "(»((?>[^»«]+)|(?-2))*«)"; // (reuseable)
$prompt = "[\\w ]+: $quoted";
var_dump(preg_match("/^$prompt\$/u","Your name: »write here«")); // Outputs 'int(1)'

?>
up
11
emanueledelgrande at email dot it
14 years ago
The recursion in regular expressions is the only way to allow the parsing of HTML code with nested tags of indefinite depth.
It seems it's not yet a spreaded practice; not so much contents are available on the web regarding regexp recursion, and until now no user contribute notes have been published on this manual page.
I made several tests with complex patterns to get tags with specific attributes or namespaces, studying the recursion of a subpattern only instead of the full pattern.
Here's an example that may power a fast LL parser with recursive descent (http://en.wikipedia.org/wiki/Recursive_descent_parser):

$pattern = "/<([\w]+)([^>]*?) (([\s]*\/>)| (>((([^<]*?|<\!\-\-.*?\-\->)| (?R))*)<\/\\1[\s]*>))/xsm";

The performances of a preg_match or preg_match_all function call over an avarage (x)HTML document are quite fast and may drive you to chose this way instead of classic DOM object methods, which have a lot of limits and are usually poor in performance with their workarounds, too.
I post a sample application in a brief function (easy to be turned into OOP), which returns an array of objects:

<?php
// test function:
function parse($html) {
// I have split the pattern in two lines not to have long lines alerts by the PHP.net form:
$pattern = "/<([\w]+)([^>]*?)(([\s]*\/>)|".
"(>((([^<]*?|<\!\-\-.*?\-\->)|(?R))*)<\/\\1[\s]*>))/sm";
preg_match_all($pattern, $html, $matches, PREG_OFFSET_CAPTURE);
$elements = array();

foreach (
$matches[0] as $key => $match) {
$elements[] = (object)array(
'node' => $match[0],
'offset' => $match[1],
'tagname' => $matches[1][$key][0],
'attributes' => isset($matches[2][$key][0]) ? $matches[2][$key][0] : '',
'omittag' => ($matches[4][$key][1] > -1), // boolean
'inner_html' => isset($matches[6][$key][0]) ? $matches[6][$key][0] : ''
);
}
return
$elements;
}

// random html nodes as example:
$html = <<<EOD
<div id="airport">
<div geo:position="1.234324,3.455546" class="index">
<!-- comment test:
<div class="index_top" />
-->
<div class="element decorator">
<ul class="lister">
<li onclick="javascript:item.showAttribute('desc');">
<h3 class="outline">
<a href="http://php.net/manual/en/regexp.reference.recursive.php" onclick="openPopup()">Link</a>
</h3>
<div class="description">Sample description</div>
</li>
</ul>
</div>
<div class="clean-line"></div>
</div>
</div>
<div id="omittag_test" rel="rootChild" />
EOD;

// application:
$elements = parse($html);

if (
count($elements) > 0) {
echo
"Elements found: <b>".count($elements)."</b><br />";

foreach (
$elements as $element) {
echo
"<p>Tpl node: <pre>".htmlentities($element->node)."</pre>
Tagname: <tt>"
.$element->tagname."</tt><br />
Attributes: <tt>"
.$element->attributes."</tt><br />
Omittag: <tt>"
.($element->omittag ? 'true' : 'false')."</tt><br />
Inner HTML: <pre>"
.htmlentities($element->inner_html)."</pre></p>";
}
}
?>
up
7
Onyxagargaryll
13 years ago
Here's an approach to create a multidimensional array according to a string's delimiters, i.e. we want to analyze...

"some text (aaa(b(c1)(c2)d)e)(test) more text"

... as multidimensional layers.

<?php
$string
= "some text (aaa(b(c1)(c2)d)e)(test) more text";

/*
* Analyses the string multidimensionally by its opening and closing delimiters
*/
function recursiveSplit($string, $layer) {
preg_match_all("/\((([^()]*|(?R))*)\)/",$string,$matches);
// iterate thru matches and continue recursive split
if (count($matches) > 1) {
for (
$i = 0; $i < count($matches[1]); $i++) {
if (
is_string($matches[1][$i])) {
if (
strlen($matches[1][$i]) > 0) {
echo
"<pre>Layer ".$layer.": ".$matches[1][$i]."</pre><br />";
recursiveSplit($matches[1][$i], $layer + 1);
}
}
}
}
}

recursiveSplit($string, 0);

/*

Output:

Layer 0: aaa(b(c1)(c2)d)e

Layer 1: b(c1)(c2)d

Layer 2: c1

Layer 2: c2

Layer 0: test
*/
?>
up
3
Anonymous
7 years ago
sass parse sample

<?php

$data
= 'a { b { 1 } c { d { 2 } } }';

preg_match('/a (?<R>\{(?:[^{}]+|(?&R))*\})/', $data, $m);
preg_match('/b (?<R>\{(?:[^{}]+|(?&R))*\})/', $data, $m);
preg_match('/c (?<R>\{(?:[^{}]+|(?&R))*\})/', $data, $m);
preg_match('/d (?<R>\{(?:[^{}]+|(?&R))*\})/', $data, $m);

/*
Array (
[0] => a { b { 1 } c { d { 2 } } }
[R] => { b { 1 } c { d { 2 } } }
[1] => { b { 1 } c { d { 2 } } }
)
Array (
[0] => b { 1 }
[R] => { 1 }
[1] => { 1 }
)
Array (
[0] => c { d { 2 } }
[R] => { d { 2 } }
[1] => { d { 2 } }
)
Array (
[0] => d { 2 }
[R] => { 2 }
[1] => { 2 }
)
*/
up
1
jonah at nucleussystems dot com
13 years ago
An unexpected behavior came up that introduced a very hard-to-track bug in some code I was working on. It has to do with the preg_match_all PREG_OFFSET_CAPTURE flag. When you capture the offset of a sub-match, it's offset is given _relative_ to it's parent. For example, if you extract the value between < and > recursively in this string:

<this is a <string>>

You will get an array that looks like this:

Array
(
[0] => Array
(
[0] => Array
(
[0] => <this is a <string>>
[1] => 0
)
[1] => Array
(
[0] => this is a <string>
[1] => 1
)
)
[1] => Array
(
[0] => Array
(
[0] => <string>
[1] => 0
)
[1] => Array
(
[0] => string
[1] => 1
)
)
)

Notice that the offset in the last index is one, not the twelve we expected. The best way to solve this problem is to run over the results with a recursive function, adding the parent's offset.
up
-1
mzvarik at gmail dot com
3 years ago
This regexp can be used for parsing IF conditions.

$str = '
(IF_MYVAR)My var is printed
(OR_MYVARTWO)My var two is printed
(OR_ANOTHER)if you use OR you don't have to END everytime
(ELSE)Whatever bro(END)

(IF_BLUE)Something (IF_SUPERB)super(END) blue - this is simple IF condition(END)
';

function isCondition($k) {
// put your user conditions here
$conds = [];
$conds['BLUE'] = true;
$conds['MYVARTWO'] = true;
$conds['ELSE'] = true; // always true
return $conds[$k];
}

function findConditions($str) {

$pattern = '~ \(if_([^\)]+)\) ((?: (?!\((end|if_)). | (?R) )*+) \(end\) ~xis';

$str = preg_replace_callback($pattern, function($m) {

$k = $m[1];
$v = $m[2];
$v = findConditions($v) ?: $v;

$ors = preg_split('~(?=\((OR_[^\)]+|ELSE))~is', $v);

$v = array_shift($ors); // hlavní

if (isCondition($k)) return findConditions($v);
else {
foreach ($ors as $or) {
list($k, $v) = explode(")", $or, 2);
$k = substr($k, 1);
if (isCondition($k)) return findConditions($v);
}
}
return ''; // no matching condition
}, $str);
return $str;
};

// will output: Whatever bro \n\n Something blue
echo findConditions($str);
up
-1
Daniel Klein
11 years ago
The order of non-mutually exclusive alternatives within a recursed sub-pattern is important.
<?php
$pattern
= '/^(?<octet>[01]?\d?\d|2[0-4]\d|25[0-5])(?:\.(?P>octet)){3}$/';
?>

You might expect that this pattern will match any IP address in dotted-decimal notation (e.g. '123.45.67.89'). The pattern is intended to match four octets in the following ranges: 0-9, 00-99 & 000-255, each separated by a single dot. However, only the first octet can include values from 200-255; the remainder can only have values less than 200. The reason for this is that if the rest of the pattern fails, recursion is not back-tracked into to find an alternative match. The first part of the sub-pattern will match the first two digits of any octet from 200-255. The rest of the pattern will then fail because the third digit in the octet does not match either '\.' or '$'.

<?php
var_export
(preg_match($pattern, '255.123.45.67')); // 1 (true)
var_export(preg_match($pattern, '255.200.45.67')); // 0 (false)
var_export(preg_match($pattern, '255.123.45.200')); // 0 (false)
?>

The correct pattern is:
<?php
$pattern
= '/^(?<octet>25[0-5]|2[0-4]\d|[01]?\d?\d)(?:\.(?P>octet)){3}$/';
?>

Note that the first two alternatives are mutually exclusive so their order is unimportant. The third alternative, however, is not mutually exclusive but it will now only match when the first two fail.

<?php
var_export
(preg_match($pattern, '255.123.45.67')); // 1 (true)
var_export(preg_match($pattern, '255.200.45.67')); // 1 (true)
var_export(preg_match($pattern, '255.123.45.200')); // 1 (true)
?>
up
-1
horvath at webarticum dot hu
10 years ago
Below are some reusable patterns. I used comments with the 'x' modifier for human-readability.

You can write also a function, that generates patterns for specified bracket/quote pairs.

<?php

/* normal paretheses */
$simple_pattern = "( (?#root pattern)
( (?#text or expression)
(?>[^\\(\\)]+) (?#text)
|
\\((?-2)\\) (?#expression and recursion)
)*
)"
;

$simple_okay_text = "5( 2a + (b - c) ) - a * ( 2b - (c * 3(b - (c + a) ) ) )";
$simple_bad_text = "5( 2)a + (b - c) ) - )a * ( ((2b - (c * 3(b - (c + a) ) ) )";

echo
"Simple pattern results:\n";
var_dump(preg_match("/^$simple_pattern\$/x",$simple_okay_text));
var_dump(preg_match("/^$simple_pattern\$/x",$simple_bad_text));
echo
"\n----------\n";

/* some brackets */
$full_pattern = "( (?#root pattern)
( (?#text or expression)
(?>[^\\(\\)\\{\\}\\[\\]<>]+) (?#text not contains brackets)
|
(
[\\(\\{\\[<] (?#start bracket)
(?(?<=\\()(?-3)\\)| (?#if normal)
(?(?<=\\{)(?-3)\\}| (?#if coursed)
(?(?<=\\[)(?-3)\\]| (?#if squared)
(?1)\\> (?#else so if tag)
))) (?#close nested-but-logically-the-some-level subpatterns)
)
)*
)"
;

$full_okay_text = "5( 2a + [b - c] ) - a * ( 2b - {c * 3<b - (c + a) > } )";
$full_bad_text = "5[ 2a + [b - c} ) - a * ( 2b - [c * 3(b - c + a) ) ) }";

echo
"Full pattern results:\n";
var_dump(preg_match("/^$full_pattern\$/x",$simple_okay_text));
var_dump(preg_match("/^$full_pattern\$/x",$full_okay_text));
var_dump(preg_match("/^$full_pattern\$/x",$full_bad_text));
echo
"\n----------\n";

/* some brackets and quotes */
$extrafull_pattern = "( (?#root pattern)
( (?#text or expression)
(?>[^\\(\\)\\{\\}\\[\\]<>'\"]+) (?#text not contains brackets and quotes)
|
(
([\\(\\{\\[<'\"]) (?#start bracket)
(?(?<=\\()(?-4)\\)| (?#if normal)
(?(?<=\\{)(?-4)\\}| (?#if coursed)
(?(?<=\\[)(?-4)\\]| (?#if squared)
(?(?<=\\<)(?-4)\\>| (?#if tag)
['\"] (?#else so if static)
)))) (?#close nested-but-logically-the-some-level subpatterns)
)
)*
)"
;

$extrafull_okay_text = "5( 2a + ['b' - c] ) - a * ( 2b - \"{c * 3<b - (c + a) > }\" )";
$extrafull_bad_text = "5( 2a + ['b' - c] ) - a * ( 2b - \"{c * 3<b - (c + a) > }\" )";

echo
"Extra-full pattern results:\n";
var_dump(preg_match("/^$extrafull_pattern\$/x",$simple_okay_text));
var_dump(preg_match("/^$extrafull_pattern\$/x",$full_okay_text));
var_dump(preg_match("/^$extrafull_pattern\$/x",$extrafull_okay_text));
var_dump(preg_match("/^$extrafull_pattern\$/x",$extrafull_bad_text));

/*

Outputs:

Simple pattern results:
int(0)
int(0)

----------
Full pattern results:
int(0)
int(0)
int(0)

----------
Extra-full pattern results:
int(0)
int(0)
int(0)
int(0)

*/

?>
To Top