CakeFest 2024: The Official CakePHP Conference

HTTP コンテキストオプション

HTTP コンテキストオプションHTTP コンテキストオプションの一覧

説明

http:// および https:// トランスポート用のコンテキストオプションです。

オプション

method string

リモートサーバーでサポートされる GETPOST あるいはその他の HTTP メソッド。

デフォルトは GET です。

header array あるいは string

リクエストに付加されるヘッダ。ここで指定した値が (User-agent:Host:、 および Authentication: などの) 他の値を上書きすることもあります。 これは、後にLocation: によってリダイレクトが行われる場合でも同様です。 よって、follow_location が有効になっている場合、 Host: ヘッダを設定することはお勧めしません。

user_agent string

User-Agent: ヘッダとして送信する値。上で説明した header オプションで user-agent が 定義されていない場合のみ使用されます。

デフォルトでは、php.iniuser_agent の設定内容を使用します。

content string

ヘッダの後に送信する追加データ。通常、POST または PUT リクエストの際に使用されます。

proxy string

プロキシサーバーを示す URI (例: tcp://proxy.example.com:5100)。

request_fulluri bool

true を指定すると、リクエストを生成する際に完全な URI (例: GET http://www.example.com/path/to/file.html HTTP/1.0) が用いられます。これは標準のリクエストフォーマットではありませんが、 このようなフォーマットを要求するプロキシサーバーも存在します。

デフォルトは false です。

follow_location int

Location のリダイレクトをたどります。 0 で無効にできます。

デフォルトは 1 です。

max_redirects int

リダイレクトをたどる最大数。値が 1 以下の場合は リダイレクトをたどらないことを意味します。

デフォルトは 20 です。

protocol_version float

HTTP プロトコルのバージョン。

PHP 8.0.0 以降では、デフォルトは 1.1 です。 それより前のバージョンでは、デフォルトは 1.0 でした。

timeout float

読み込みタイムアウト秒数を float (例 10.5) で指定します。

デフォルトでは php.ini 設定 default_socket_timeout の値を使用します。

ignore_errors bool

ステータスコードが失敗を意味する場合でもコンテンツを取得します。

デフォルトは false です。

例1 ページの取得と POST データの送信

<?php

$postdata
= http_build_query(
array(
'var1' => 'some content',
'var2' => 'doh'
)
);

$opts = array('http' =>
array(
'method' => 'POST',
'header' => 'Content-type: application/x-www-form-urlencoded',
'content' => $postdata
)
);

$context = stream_context_create($opts);

$result = file_get_contents('http://example.com/submit.php', false, $context);

?>

例2 リダイレクトを無視し、ヘッダとコンテンツの取得

<?php

$url
= "http://www.example.org/header.php";

$opts = array('http' =>
array(
'method' => 'GET',
'max_redirects' => '0',
'ignore_errors' => '1'
)
);

$context = stream_context_create($opts);
$stream = fopen($url, 'r', false, $context);

// ヘッダ情報およびストリームのメタデータ
var_dump(stream_get_meta_data($stream));

// $url の実際のデータ
var_dump(stream_get_contents($stream));
fclose($stream);
?>

注意

注意: 基盤となるソケットストリームのコンテキストオプション
これ以外のコンテキストオプションが 基盤となるトランスポート でサポートされています。 http:// ストリームの場合は、tcp:// のコンテキストオプションを参照ください。 https:// ストリームの場合は、ssl:// のコンテキストオプションを参照ください。

注意: HTTP ステータスライン
このストリームラッパーがリダイレクトをたどると、 stream_get_meta_data() が返す wrapper_data のインデックス 0 の内容が必ずしもそのコンテンツの HTTP ステータスラインであるとは限らなくなります。

array (
  'wrapper_data' =>
  array (
    0 => 'HTTP/1.0 301 Moved Permanently',
    1 => 'Cache-Control: no-cache',
    2 => 'Connection: close',
    3 => 'Location: http://example.com/foo.jpg',
    4 => 'HTTP/1.1 200 OK',
    ...
最初のリクエストが 301 (permanent redirect) を返したので、ストリームラッパーが自動的にリダイレクト先をたどり、レスポンス 200 (インデックス = 4) を取得しました。

add a note

User Contributed Notes 10 notes

up
31
nate
9 years ago
Note that if you set the protocol_version option to 1.1 and the server you are requesting from is configured to use keep-alive connections, the function (fopen, file_get_contents, etc.) will "be slow" and take a long time to complete. This is a feature of the HTTP 1.1 protocol you are unlikely to use with stream contexts in PHP.

Simply add a "Connection: close" header to the request to eliminate the keep-alive timeout:

<?php
// php 5.4 : array syntax and header option with array value
$data = file_get_contents('http://www.example.com/', null, stream_context_create([
'http' => [
'protocol_version' => 1.1,
'header' => [
'Connection: close',
],
],
]));
?>
up
15
daniel dot peder at gmail dot com
6 years ago
note that for both http and https protocols require the same 'http' context keyword:

<?php

// CORRECT example:
// this will work as expected
// note the url with https but context with http
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('http' => array(...))));

// INVALID example:
// this will not work, the context will be ignored
// note the url with https also context with https
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('https' => array(...))));
up
18
daniel.peder (a) gmail.com
6 years ago
note that both http and https transports require the same context name http

// OK example:
// this will work as expected
// note the url with https but context with http
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('http' => array(...))));

// INVALID example:
// this will not work, the context will be ignored
// note the url with https also context with https
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('https' => array(...))));
up
13
gourav sarkar
13 years ago
watch your case when using methods (POST and GET)...it must be always uppercase. in case of you write it in lower case it wont work.
up
3
ASchmidt at Anamera dot net
3 years ago
With the default of

'follow_location' => 1

be certain NEVER include a "Host:" header in the 'header' array.

If the host is set to "mydomain.com", and that web site has a (quite common) redirect to "www.mydomain.com", then the initial request to "http://mydomain.com" will get the expected response of:

HTTP/1.1 301 Moved Permanently
Location: http://www.mydomain.com/

However, the follow-up request does NOT replace the original "host" header with the new "location" value, as one would expect. Consequently each "follow-location" request will again be served by the original host of "http://mydomain.com", and continue the redirect loop until 'max_redirects' has been exhausted.

(For details: https://bugs.php.net/bug.php?id=77889)
up
3
ywarnier at beeznest dot org
6 years ago
Note that setting request_fulluri to true will *change* the value of $_SERVER['REQUEST_URI] on the receiving end (from /abc.php to http://domain.com/abc.php).
up
4
aruntechguy at outlook dot com
6 years ago
If you want to use Basic Auth while using get_headers(), use stream_context options below.

I am using HEAD method here, but please feel free to use GET also.

<?php
$targetUrl
= 'http or https target url here';
$basicAuth = base64_encode('username:password');

stream_context_set_default(
[
'http' => [
'method' => 'HEAD',
'header' => 'Authorization: Basic ' . $basicAuth
]
]
);
$result = get_headers($targetUrl);

print_r($result);
up
8
vchampion at gmail dot com
11 years ago
If you use the proxy server and encounter an error "fopen(http://example.com): failed to open stream: HTTP request failed! HTTP/1.0 400 Bad Request" note that in many situations you need also set the parameter "request_fulluri" to "true" in your stream options. Without this option the php script sends the empty request to the server as "GET / HTTP/0.0" and the proxy server replies to it with the "HTTP 400" error.

For example (working sample):
<?php
$stream
= stream_context_create(Array("http" => Array("method" => "GET",
"timeout" => 20,
"header" => "User-agent: Myagent",
"proxy" => "tcp://my-proxy.localnet:3128",
'request_fulluri' => True /* without this option we get an HTTP error! */
)));

if (
$fp = fopen("http://example.com", 'r', false, $stream) ) {
print
"well done";
}
?>

P>S> PHP 5.3.17
up
5
jay
8 years ago
Remember to match content with Content-type:

<?php

$data
= array(
'var1' => 'some content',
'var2' => 'doh'
);

$opts = array('http' =>
array(
'method' => 'POST',
'header' => 'Content-type: application/json', // here...
'content' => json_encode($data) // and here.
)
);

. . .

?>
up
2
chris
10 years ago
I had quite a bit of trouble trying to make a request with fopen through a proxy to a secure url. I kept getting a 400 Bad Request back from the remote host. It was receiving the proxy url as the SNI host. In order to get around this I had to explicity set the SNI host to the domain I was trying to reach. It's apparently the issue outlined in this bug:

https://bugs.php.net/bug.php?id=63519

<?php
$domain
= parse_url($file, PHP_URL_HOST);
$proxy_string = "tcp://" . WP_PROXY_HOST . ":" . WP_PROXY_PORT;
$opts = array(
'http' => array( 'proxy' => $proxy_string ),
'ssl' => array( 'SNI_enabled' => true, 'SNI_server_name' => $domain));
$context = stream_context_create($opts);
$handle = fopen( $file, 'r', false, $context );
?>
To Top